VOOPOO DRAG 2 177W & UFORCE T2 Starter Kit

The long-awaited redesign to the popular VOOPOO DRAG has arrived with the VOOPOO DRAG 2 Starter Kit. The DRAG 2 Starter Kit features the all-new revolutionary GENE.FIT chip and the all-new UFORCE T2 Sub-Ohm Tank. Designed with style and performance in mind, the DRAG 2 offers you a device that is visually striking while also packing a boatload of power. Their renowned GENE.FIT chip will give you the ability to power any coil you throw at it, whether it be Titanium, Stainless Steel, Ni200, and Kanthal, so you can connect virtually any 510 threaded sub-ohm tank and expect to have a high quality vaping experience.

The VOOPOO DRAG 2 Box Mod is engineered with a rugged, yet aesthetically pleasing design unlike any other vape mod on the market. When held in your hand, you will note how its chassis perfectly molds into your palms. You can feel its high quality design through each of the devices smoothed out curves and sleeker lines when compared to its predecessor the DRAG. It’s also ¼ lighter than the original DRAG. From its rigid alloy body, to its beautifully colored resin infused body panels, the VOOPOO DRAG 2 truly stands out from the multitudes of sub-ohm box mods available on the market.

The VOOPOO DRAG 2 Starter Kit comes equipped with the brand new UFORCE T2 Sub-Ohm Tank. Paired with the DRAG 2, you will receive a vaping experience unlike any other. The UFORCE T2 Tank features a 5ml maximum juice reservoir, an ergonomic sliding top-fill design, and a triple-slotted airflow control setup. It also utilizes the VOOPOO UFORCE OCC Coil System, and comes pre-packaged with a 0.4 ohm U2 Dual Parallel Coil rated for 40 – 80W and a 0.2 ohm N3 Triple Mesh Coil that is rated for 65-100W. The tank will also arrive with its very own matching wide bore resin drip tip that is unique only to your device.

Combine the stunning looks and the highly advanced GENE.FIT Chip technology of the DRAG 2 Mod, with the powerful and efficient UFORCE T2 Tank, and you have the VOOPOO DRAG 2 Starter Kit. The long awaited redesign of the DRAG has arrived, and it’s gorgeous. Now available at Giant Vapes.

Coil Compatibility: The VOOPOO DRAG 2 Starter Kit comes equipped with 2 coils from the UFORCE OCC Coil Family. You can find additional compatible coils HERE.

Compatible Batteries: The mod included in this kit requires two 18650 batteries, which are not included with the VOOPOO DRAG 2 Box Mod. You can find batteries HERE or add them to your order at the bottom of this page. Batteries are not available for international orders or orders shipping to overseas addresses, including APO/FPO addresses. Batteries ordered to overseas addresses will be removed from your order.

Colors: Aurora, Scarlet, Dawn, Island, Ink

VOOPOO DRAG 2 177W & UFORCE T2 Starter Kit Includes:

(1) VOOPOO DRAG 2 177W Box Mod

(1) UFORCE T2 Sub-Ohm Tank

(1) 0.4 ohm U2 Dual Parallel Coil

(1) 0.2 ohm N3 Triple Mesh Coil

(1) Spare Glass Tube (3.5ml)

(1) Micro USB Cable

(1) Spare Parts Bag

(1) Instructional Manual

(1) Warranty Card

VOOPOO DRAG 2 177W & UFORCE T2 Starter Kit Features:

VOOPOO DRAG 2 177W TC Box Mod

– Ni200, Titanium, Stainless Steel Coil Compatibility

– Premium Zinc Alloy Construction

– Advanced GENE.FIT Chip

– TCR Adjustments Mode

– Battery Set

– Flavor Set

– Cloud Mode

– Colorful Resin Inlay Design

– Intuitive OLED Screen

– Large Firing Button

– Mode-Setting Button

– Two Adjustment Buttons

– Magnetized Battery Door Cover

– Over Temperature Protection

– Output Over-Current Protection

– Overcharge Protection

– Over Discharge Protection

– Short-Circuit Protection

– Switch Timeout Protection – 10 Seconds

– Micro USB Port

– 510 Connection

VOOPOO UFORCE T2 Sub-Ohm Tank

– 25mm Tank Diameter (28mm with pre-installed bubble-glass tank)

– 3.5ml Standard Juice Capacity

– 5ml Maximum Juice Capacity (pre-installed)

– Superior 304 Stainless Steel Construction

– UFORCE OCC Coil Technology

– 0.4 ohm U2 Dual Parallel Coil – rated for 40-80W

– 0.13 ohm N3 Triple Mesh Coil – rated for 65-100W

– Convenient Sliding Top-Fill Method

– Triple Bottom Airflow Control

– 14mm Resin Widebore Drip Tip With Matching Colorways

– 24K Gold-Plated 510 Connection

VOOPOO DRAG 2 177W & UFORCE T2 Starter Kit Specifications:

VOOPOO DRAG 2 177W TC Box Mod

Material: Zinc Alloy

Size: 88.3mm x 51mm x 26.5mm

Weight: 158 grams (without batteries)

Power Range: 5W – 177W

Voltage Range: 0.1V – 7.5V

Resistance Range: 0.05 ohm – 3 ohm

Temperature Range: 200 degrees Fahrenheit – 600 degrees Fahrenheit / 100 degrees Celsius to 315 degrees Celsius

VOOPOO UFORCE T2 Sub-Ohm Tank

Material: Stainless Steel / Resin / Pyrex Glass

Capacity: 3.5ml, 5ml with Installed Bubble Tank

Size: 25mm (28mm w/bubble glass) x 54.45mm

Weight: 29g

Threading: 510

It’s the follow-up that we’ve all been waiting for: the Voopoo Drag 2. Ever since the enormous success of the original Drag the vaping community have been anxiously awaiting an update, and that day has finally come.

The Drag 2 kit comes with the UFORCE T2 sub-ohm tank, and it’s compatible with the whole range of UFORCE coils. It also has a 5ml max capacity.

Having used the original Drag extensively over the last year as one of my go-to mods, I have a good idea of what’s new and what’s changed. I also have a good idea of what improvements I want to see.

In this Voopoo Drag 2 kit review, I’m going to go over everything that you need to know about this latest addition to the Drag family. I’ll also go over the UFORCE T2 tank.